5.5 x 2.1mm 90 Degree Barrel Jack Male Pigtail 1 Meter 16 AWG

Description

90 Degree Barrel Jack Male Pigtail Overview

The 5.5 x 2.1mm 90 Degree Barrel Jack Male Pigtail allows you to power your Bitaxe devices from a Mean Well LRS-50-5 or any quality 5-volt supply, while the UL2464 16 AWG red and black conductors and pre tinned ends make it fast to land on screw terminals or a distribution block for running multiple miners.

Important

Ring or fork terminals are not included. Please purchase the correct ring or fork terminals separately to match your power supply or distribution block.

Highlights

• Right angle 5.5 x 2.1mm male plug reduces strain and fits tight spaces.
• One meter length for clean routing on benches and racks.
• UL2464 16 AWG two conductor round cable with flexible PVC jacket.
• Stripped and pre tinned leads about five millimeters for quick, secure terminations.
• Color coded red positive and black negative for foolproof wiring.

Recommended use

• Pair with a Mean Well LRS-50-5 to distribute 5 volts to multiple Bitaxe devices.
• Budget current carefully. The LRS-50-5 provides up to 10 amps total. Keep continuous load at or below about eighty percent for best thermal performance.
• Use one pigtail per device whenever possible for cleaner power delivery.

Basic specs

• Connector 5.5 x 2.1mm DC plug, center positive.
• Orientation 90 degree.
• Cable type UL2464 16 AWG two core round.
• Length 1 meter.
• Jacket color black with red and black inner conductors.
• End preparation stripped and tinned.

Wiring tips

• Always power off the power supply before landing wires.
• Use ring or fork terminals sized for your power supply and 5.5 x 2.1mm 90 Degree Barrel Jack Male Pigtail.
• Land red to V plus and black to V minus and tighten firmly.